TAC Terminal Block Double Layer
TAC terminal blocks are widely used in the circuit of AC 50Hz (60Hz), rated voltage 800V, DC 440V and below, rated sectional area 0.75~150mm2 connection conductor. It's also suitable for connecting the circle copper conductor of terminal that is not specially processed of pressure welding.
-
TAC Terminal Blocks Grey & Beige
SAR1.00
TAC Terminal Blocks Yellow-Green
SAR2.50
TAC Terminal Block Orange Color
SAR1.50
TAC Terminal Block End Plates
SAR0.50 -
TAC Fuse Terminal Block
SAR2.75
TAC Terminal Block Label Tag
SAR1.00
TAC Terminal Block Marking Strip
SAR1.00
TAC Terminal Block Stoppers
SAR1.00
Characteristics:
Reasonable installation structure design, wide general-purpose nature, used on both G type an TH type DIN rail. If under 50mm2, it adopts fasten accessory installation.
Small size, complete set of specification, big connected conductor sectional area and good electrical conductivity.
The one that is below 50 mm2 adopts copper press line frame and copper fasten screw and others adopt copper press line frame and steel screw and copper skirt plate.
It has large tightening torque and self-locking function.
The strong combined function makes the connection of conductors simpler.
|
Cross Section mm2 |
Rated Volt |
Rated Amp |
Rigid Wire mm2 |
Flexible Wire mm2 |
Connection Type |
JUT-1 Size mm |
||
|
T |
H |
W |
||||||
|
2.5 |
500 |
32 |
0.2-2.5 |
0.2-2.5 |
Screw |
6.2 |
62 |
56 |
|
4 |
0.2-4 |
0.2-4 |
6.2 |
67 |
56 |
|||