3M UTP Network Cable CAT6A
3M™ Category 6A U/UTP Cable (with cross-shaped separator) enables deployment of unshielded Category 6A/Class EA systems when installed with 3M™ K6AUH U/UTP RJ45 Jacks. The cable is round, which simplifies jack assembly and cable management.
-
3M UTP Network Cable CAT6
SAR374.00
TAC UTP Network Cable CAT5E
SAR175.00
TAC UTP Network Cable CAT6
SAR325.00
TAC FTP Network Cable CAT6
SAR475.00 -
TAC UTP Network Cable Outdoor CAT6
SAR420.00
SYSTIMAX UTP Network Cable CAT6
SAR630.00
BELDEN UTP Network Cable CAT6
SAR345.00
Conductor Diameter: AWG 23 (Ø 0.56 +/- 0.01mm)
Insulation Diameter: PE Ø 1.04+/- 0.05 mm
Cable assemblies: Pairs
Sheath material: PVC or LS0H
Color: Green
Length: 500 Mtr
MECHANICAL FEATURES
Maximum cable diameter (mm): 8.30 +/- 0.30
Bending Radius (mm):
Dynamic (installation): ≥ 8x outer diameter
Static (installed): ≥ 4x outer diameter
Temperature Range:
In service -20°C + 60°C
Installation -20°C + 60°C
Max. Pulling Tension (lbs): 40
ELECTRICAL FEATURES AT 20°C
DC Resistance: max 9.5 Ω/100m
Resistance Unbalance: ≤ 2 %
Insulation Resistance (500 V): ≥ 5000 M Ω/km
Test Voltage: AC 1.7 kV / 2sec
Capacitance Unbalance (pair to ground): max. 1600 pf / km at 1 kHz
NPV (nominal): 64%
STANDARDS
|
Cables |
Cabling System Standard |
Fire Rating |
Smoke / Gas (LSOH) |
|
IEC 61156-5 ed. 2 |
ISO/IEC11801 ed. |
LSZH: IEC 60332-1 |
IEC 61034-2 |
|
EIA/TIA 568-C.2 |
2 EIA/TIA 568-C.2 |
PVC: IEC 60332-1 |
IEC 60754-1 |
|
|
|
|
IEC 60754-2 |
APPLICATION
IEEE 802.3: 10GBASE-T; 1000BASE-T; 100BASE-T; 10BASE-T
2400 / 1200 Mb/s ATM
IEEE 802.3af – PoE; IEEE 802.3at - PoE+